Honors Thesis

Clarkson University » Honors Program » Research

The Honors thesis project provides one of the cornerstones for the Honors Program, enabling students to make their own contribution to a current research problem. To explore the kind of problems that previous thesis students have investigated, use the data base below, which includes proposals from all the previous thesis projects.

All thesis proposals below are in Microsoft Word (.doc) or Adobe PDF format. You may left click on them to open in MS Word or right click to save to your computer.

The proposals are listed in alphabetical order by student's last name.

Name	Summer	Research Area	Advisor
	Topic
Allan, Adam	2003	Mathematics	Ellingson
	Gaussian Integers
Alstadt, Jonathan	2007	Software Engineering	Rodriguez-Perez. P.
	Assistive robotics with BCI
Anderson, Mitch	2006	Chemical Engineering	Babu, S.V, and Pandija, S.
	Chemical Mechanical Polishing of Copper
Ausfresser, Sigmund	2003	Chemistry	Li, Y.
	The Effects of a Hydrotrope on Liposome Permeability
Barr, Alexandria	2008	Electrical and Chemical Engineering	Conry, S.
	Whether Novice Programmers are Predisposed to use Behavioral Design Patterns
Barr, Alexandria	2007	Chemical and Biomolecular Engineering	Jachuck, R.
	Liquid Film Thickness Measurements in a Horizontally Rotating Cylinder
Bastien, Christopher	2003	Civil & Environmental Engineering	Shen, H.
	Computational Simulation of Granular Material Behavior
Bear, Laura	2007	Mechanical and Aeronautical Engineering	Dhaniyala, S.
	Developing an Experimental Setup for Boundary Layer Separation Data Collection
Beattie, Kristin	2003	Engineering & Management	Menz, F.
	Renewable Energy in the United States: Policy Effectiveness and Economic Issues
Beckingham, Bryan	2004	Chemical Engineering	Campbell, G.
	An Analysis of the Surface Roughness of Thin Polymer Films using Laser Image and Scattering
Beckman, Sarah	2003	Bio-Molecular Science	Peploski, J.
	Refining a DNA Fingerprinting Procedure
Bell, Melissa	2004	Chemical Engineering	Baltus, R.
	Humic Acid Fouling During Ultrafiltration
Bellor, Katherine	2006	Electrical Engineer/Pre-Med	Saranov, E. and Schuckers, S.
	Determination of Sleep/Awake State in Infants by Respiratory Analysis
Bingham, Andrew	2004	Mechanical & Aeronautical Engineering	Visser, K.
	Construction and Demonstration of a Prototype Spring-Based Tidal Energy Extraction Device
Bingham, Andrew	2003	Mechanical & Aeronautical Engineering	Visser, K.
	Computer Modeling of Spring Based Gravitational Tidal Energy Extraction
Boyd, Victoria	2008	Civil and Environmental Engineering	Badr, L.
	Mercury Mass Balance in the Adirondack Mountains: Stemflow and Soil Concentrations
Boyd, Victoria	2006	Environmental Engineering	Holsen, T.
	Measuring Dissolved Gaseous Mercury in Raquette River
Boyle, Jerry	2004	Mechanical Engineering	Dhaniyala, S.
	Development of a Nanometer Crossflow Differential Mobility
Brackett-Rozinsky, Nevin	2008	Mathematics	Skufca, J.
	Rolling Pendulum Nonlinear Dynamics
Brown, Sarah	2007	Electrical Engineering	Schilling, R.,Schuckers, S.,Sazonov, E.
	A Hands Free Human-Computer Interface Using Processed Head Motion
Brush, David	2004	Mechanical & Aeronautical Engineering	Issen, K.
	Compaction Band Formation and Propagation Behavior in Closed Cell Aluminum Foam
Burdick, Kyle	2004	Mathematics & Computer Science	Searleman, J.
	Virtual Environment Design & Human Computer Interaction with a Virtual Reality Wheelchair Simulator
Burdick, Noah	2003	Chemical Engineering	Campbell, G.
	Temperature Deviation of a Non-Newtonian Fluid from Rheologically Precalculated Temperature Variations
Butkiewicz, Melissa	2008	Chemistry	Christiansen, P.
	Biomass Analysis and Screening for Fuel Applications
Chiaravalle, William	2005	Computer Engineering	Carroll, J.
	Preparation of Team 229 for Future Autonomous Implementation
Chiaravalle, William	2004	Computer Engineering	Conry, S.
	Creation of a Virtual Reality Grocery Store for the Rehabilitation of Head Injury Patients
Cipollina, Joseph	2006	Mechanical Engineering	Dhaniyala, S.
	Fabrication and Testing of an Aerosol Hydrocarbon Detector
Czajkowski, Mark	2007	Mechanical Engineering	Visser, K.
	Feasibility of a Unique Wind Powered Home Heating System
Davis, Andrew	2007	Biomolecular Science/Math	Fowler, K.
	Effects of Saltwater Intrusion on a Costal Aquifer; Henry’s Problem and a Coastal Region of Hersonissos, Crete
Davis, Andrew	2007	Biomolecular Science/Math	Fowler, K.
	Grid Dependence of Solutions for Water Supply Management Problems
Davis, Andrew	2006	Biomolecular Science	Langen, T.
	Effects of Roads and Fencing on the Microclimate of Turtle Nests
Davis, Michael	2008	Mathematics	Mondal, S.
	A Study of the Association of Statistics in EURO 2008
Deschenes, Timothy	2003	Mechanical & Aeronautical Engineering	Visser, K.
	Tractor Trailer Drag Reduction
Dosiek, Luke	2003	Electrical & Computer Engineering	Pillay, P.
	Modeling of a Stand Alone Horizontal Axis Wind Turbine
Durfee, Benjamin	2007	Civil & Environmental Engineering	Grimberg, S.
	Mixing Intensity Effects on Sand Separation in Continuous Mix Anaerobic Manure Digestion
Durfee, Benjamin	2004	Civil & Environmental Engineering	Grimberg, S.
	Effects of NAPL Presence and Growth Stage on the Movement of Pseudomonas saccharophilia P15 through Soil Columns
Eddy, Patrick	2003	Mechanical & Aeronautical Engineering	Valentine, D.
	Unsteady Hydrodynamics of the Swimming of Cetaceans
Edmands, Maximillian	2007	Computer Science	Searleman, J.
	Design of a Virtual School Environment for Power Wheelchair Training
Elser, Matthew	2008	Mechanical Engineering	Visser, K.
	Design Challenges of an Electric Vehicle And Solutions in Development
Fetterman, Aaron	2007	Software Engineering	Searlman, J.
	Automatic News Summarization Using a Dependency Structure
Fetterman, Aaron	2005	Software Engineering	Conry,S.
	Using Multi-Agent Strategies to Solve a Blocks-World Artificial Intelligence Problem
Fischer, Andrea	2004	Chemistry	Luck, L.
	The Genetic Engineering of a Poly His Tag on the C-Terminal end of the E.coli Receptor for Glucose and Galactose
Folts, Christopher	2003	Biology	Woodworth, C.
	Preliminary Studies on Engineering of Human Skin Substitutes:Effect of Transforming Growth Factor -?1 on Gene Expression by Skin Cells
Fox, Andrew	2004	Mechanical Engineering	Morrison, D/Moosbrugger, J
	Effects of Materials Processing on the Magnetic Properties of Nickel
Fu, Xiaojing	2008	Mathematics and Computer Science	Fowler, K.
	The Effects of Heterogeneities on the Solution to Groundwater Flow Problems
Ganguly, Srabonti	2003	Mathematics & Computer Science	Tamon, C.
	Quantum Error Correcting Codes
Gerbig, Chase	2004	Civil & Environmental Engineering	Grimberg, S.
	Mercury Complexation with Dissolved Organic Matter as a Function of Redox Potential in Natural Aquatic Systems
Gibbons, Zachary	2007	Mechanical and Aeronautical Engineering	Marzocca, P.
	Flight control, Data Acquisition, and Payload Integration for An Aerosol Sampling Unmanned Aerial
Gilbert, Christopher	2008	Chemical and Biomolecular Engineering	Subramanian, R.S.
	Behavior of Drops Undergoing Thermocapillary Motion on a Solid Horizontal Surface
Gilbert, Christopher	2007	Chemical and Biomolecular Engineering	Subramanian, R.S.
	Thermocapillary Motion of a Liquid Drop on a Horizontal Solid Surface
Gilbert, Christopher	2006	Chemical Engineering	Subramanian, R.S.
	The Effect of Temperature on the Contact Angle of a Drop on a Surface
Gilbert, Christopher	2005	Chemical Engineering	Subramanian, R.S.
	A Study of the Contact Angle of Drops on a Solid Silicon Surface That Has Been Treated to Produce a Wettability Gradient
Gorton, Samuel	2006	Chemical Engineering	Jachuck, R.
	Desktop Biodiesel Plant
Gorton, Samuel	2004	Chemical Engineering	Campbell, G.
	Viscoelastic Creep in Polymer Parts Molded at Various Injection Molding Processing Conditions
Grayson, Courtney	2006	BioMolecular Science	Woodworth, C.
	Development and Optimization of a Reporter Gene Assay to Measure NF-kB Activation by Human Papillomaviruses in Cervical Cells
Grayson, Courtney	2005	Bio-Molecular Science	Christiansen, P.
	Simple Procedure for Characterizing Transesterification Reactions
Greening, Nelson	2005	Interdisciplinary Engineering and Management	Carroll, J., Ensby, M., Searleman, J.
	Virtual Product Development and its effect on New Product Development
Grzeskowiak, Dustin	2008	Finance	Nocetti, D.
	The American Housing Crisis: An Economic Analysis Outlining Causative Factors
Gucwa, Kevin	2008	Mechanical and Aeronautical Engineeing	Dhaniyala, S.
	Droplet Splattering: Measurement of Secondary Particle Size Distributions
Gucwa, Kevin	2007	Interdisciplinary Mechanical and Aeronautical Engineering	Moharrei, A.,Dhaniyala, S.
	Boundary Layer Separation Analysis: Automated Image Analysis Technique
Gumuka, Michael	2004	Physics	Wick, D.
	An Impulse Based Assessment of Training Style Differences Taekwondo Techniques
Hemsing, Frank	2008	Mechanical and Aeronautical Engineering	Marzocca, P.
	Modeling and Experimentation of a Flutter Like Aeroelastic Power Source (FLAPS)
Hilbert, Brian	2008	Mechanical Engineering	Bohl, D
	Experimental Study of Mixing Characteristics at low Reynolds Number in a Simple Batch Mixer
Hoffman, Lindsay	2006	Civil & Environmental Engineering	Grimberg, S.
	The Effects of Varying Redox Conditions on Bacterial Communities in Mercury-Contaminated Soil
Hoffman, Lindsay	2004	Civil & Environmental Engineering	Young, T.
	Predicting the Volumn of Runoff Annually from the Cascade Lakes
Holloway, Jason	2007	Biomedical and Chemical Engineering	Rengaswamy, R., Campbell, G.
	Controlling Dual-Polymer Membrane Manufacture for PEM Fuel Cells and Interfacing Mass-Flow Controls with an Electronic Load Mainframe
Ibeneche, Onyinyechi	2003	Electrical Engineering	Ziarani, A.
	Implementation of a Medical Device for Testing the Functionality of the Ear in Newborns
Illig, David	2008	Computer Engineering	Schuckers, S.
	Determination of the Effects of Exposure to Diesel Exhaust on Potsdam Schoolchildren
Jha, Pushpak	2008	Electrical Engineering	Hua, F.
	The Fabrication and Uses of Nano-Polymers
Jones, Matthew	2005	Mechanical and Aeronautical Engineering	Visser, K.
	Analysis of Wake Flows for Induced Drag Reduction
Kopra, Christopher	2008	Chemical and Biomolecular Engineering	Rasmussen, D.
	Sodium Borohydride Hydrolysis to Generate Hydrogen for Fuel Cells
Kopra, Christopher	2007	Civil and Environmental Engineering	Janoyan, K.
	Structural Evaluation and Monitoring of Truss Bridges in New York State
Ladew, Matthew	2008	Electrical Engineering	Carroll, J.
	Portable Pulse Oximetry
Lanahan, Matthew	2007	Electrical Engineering	Meyer, R.
	HAVAC High-speed Autonomous Vehicle with Adaptive motion Control
Lanahan, Matthew	2005	Electrical Engineering	Carroll, J.
	Preparation of Team 229 for Future Autonomous Implementation
Landau, Elias	2007	Aeronautical and Mechanical Engineering	Bohl, D.
	Velocity and vorticity field of a Synthetic Jet
Lang, Maria	2008	Mechanical Engineering	Dhaniyala, S.
	Characterization of Electrospray Aerosol Generator
Lawney, Brian	2003	Civil & Environmental Engineering	Shen, H.
	Dynamics of Sea Ice Floes
Leach, Brendan	2008	Chemical Engineering	Campbell, G.
	Design and Fabrication of a Light Weight Planar Proton Exchange Membrane Fuel Cell
Lowenstein, Keegan	2008	Computer Science and Psychology	Dowman, R.
	Modeling the Brain Mechanisms of Detecting and Orienting Attention towards Threat
Mangan, Niall	2005	Physics	benAvraham, D.
	Mathematical Methods for Analysis of Diffusion
Mangan, Niall	2004	Biology	Moczydlowski, E.
	Stable Expression of Recombinant Saxiphilin in Insect and Yeast Cells for Large Scale Production and Purification
Mao, Zhimin	2005	Business	Mahmoodi, F.
	Optimize the Supply Chain of a Major Office Equipment/Automation Company
Marker, Daniel	2004	Biology	Woodworth, C.
	Activation of NF-?B in Human Epithelial Cells Expressing Human Papillomavirus (HPV) Oncogenes
Marshall, Norman	2003	Chemistry	Li, Y.
	A Mechanistic Study of the Formulation fo Liposome-Stabilized Microbubbles Using Nuclear Magnetic Resonance
McKeever, Eric	2003	Mechanical & Aeronautical Engineering	Dhaniyala, S.
	Design and Development of a Sub-micorn Electrical Particle Counter
Mihajlovik, Vidoje	2006	Software Engineering/ Humanities	Searleman, J.
	Enhancing Realism in a Virtual Environment for Stroke Patient Rehabilitation
Miller, Laniece	2006	Chemical Engineering	Rossner, A.
	Evaluation of Holdup Measurement Models by Use of Facility Simulation
Miller, Laniece	2004	Chemical Engineering	Campbell, G.
	Mixing and Particle Tracking in a Single Screw Extruder
Moeller, Michael	2008	Mechanical and Aeronautical Engineeting	Visser, K.
	Analysis of Diffuser Augmented Wind Turbines
Moeller, Michael	2007	Mechanical and Aeronautical Engineering	Jha, R.
	Fabrication of Composite Laminates Using a Vacuum Bag Process
Nadeau, Andrew	2008	Electrical and Computer Engineering	Kandaswamy, U.
	Iris Identification from a Distance
Nelson, Lisa	2008	Chemical and Biomolecular Engineering	Taylor, R.
	Modeling of Energy Efficient Complex Distillation Columns
Nelson, Lisa	2007	Chemical Engineering	Taylor, R.
	Modeling of Energy Efficient Dividing-Wall Distillation Columns
Northrup, Ryan	2008	Mathematics and Computer Science	Fowler, K.
	Numerical Approaches to Initial Value Problems using Interval Mathematics
Nuhfer, Dustin	2007	Engineering	Holson, T.
	The Effects of Solar Radiation on Dissolved Gaseous Mercury Variations in the Raquette River
Olson, David	2008	Mechanical and Aeronautical Engineering	Visser, K.
	Self-Starting Contra-Rotating Vertical Axis Wind Turbine for Home Heating Applications
Onyewuchi, Stanley	2008	Electrial Engineering	Schuckers, S.
	Biometrics Spook &Live Finger Collection Using Optical and Capacitive Scanners
Onyewuchi, Stanley	2007	Electrical Engineering	Carroll, J.
	Robotic and Signal Processing Application and Manipulation Using Embedded Systems
Pascucci, Vincent	2008	Chemical Engineering	Jachuck, R.
	Photoinitiated Copolymerization Using a Narrow Channel Reactor
Pascucci, Vincent	2005	Chemical Engineering	Rasmussen, D.
	The Synthesis of Aerogels to Separate Particles
Petko, Danielle	2004	Cemistry	Shipp, D.
	Synthesis of Poly(Methacrylic Acid) using RAFT Polymerization
Petruczok, Christy	2005	Chemical Engineering	Shipp, D.
	Synthesis of Silica-Strengthened Poly (methylmethacrylate) Using Reversible Addition-Fragmentation Chain Transfer Polymerization
Pudlo, Jeffery	2008	Aeronautical Engineering	Jha, R.
	A Study of Composite Strength Calculation
Reardon, Bridget	2006	Mechanical & Aeronautical Engineering	Issen, K.
	Effect of Mass Distribution on Deformation of Three Dimensional Open-Celled Porous Materials Under Uniaxial Compression
Reardon, Bridget	2004	Mechanical & Aeronautical Engineering	Issen, K.
	Effect of Negative Poisson's Ratio on Compaction Bands in Foam
Rector, M. Curtis	2004	Mechanical & Aeronautical Engineering	Visser, K.
	The Effect of Blade Pitch on Small Multi-Bladed Horizontal-Axis Wind Turbines
Ricci, Justin	2005	Mechanical & Aeronautical Engineering	Cetinkaya, C.
	MEMS Rotational Oscillators for Liquid-Phase Sensors
Riley, Courtney	2006	Biomolecular Science	Woodworth, C.
	Comparison of NF-kB Baseline Activity in Normal, Immortal, and Tumor Cells
Riley, Courtney	2005	Biology	Woodworth, C.
	Development and Optimization of a Reporter Gene Assay to Measure Activation of NF-kB
Ronan, Michael	2005	Mechanical & Aeronautical Engineering	Visser, K.
	Effect of Vertical Splitter Plates on the Performance of a Diffuser Equipped Bluff Body
Roper, Jennifer	2008	Psychology
	Developing Protocols to Study How Threats to the Body are Detected and Capture Attention
Rose, Adam	2006	University Studies	Fowler, K.
	Polymer Filter Optimization with non-Newtonian Methods
Rose, Adam	2005	Biology	Langen, Tom
	Success of Snapping Turtle (Chelydra serpentina) Nests Constructed along Paved Roads
Sarponmaah, Sylvia	2005	Biology	Woodworth, C.
	Development and Optimization of a Reporter Gene Assay to Measure Activation of NF-kB
Savage, Samuel	2008	Computer Science and Engineering	Conry, S.
	A Graphical System for Debugging World of Warcraft User Interface Scripts Enhanced with Automation
Savage, Samuel	2007	Electrical and Computer Engineering and Computer Science	Conry, S.
	Artificial Intelligence
Savage, Samuel	2006	Software Engineering	Hesse, W.
	Open Graphics Language Shading Language
Savage, Samuel	2005	Electrical and Computer Engineering and Computer Science	Conry, S. and Searleman, J.
	Improvements to a Game for Virtual Reality Wheelchair Training
Schaefer, Justen	2003	Chemical Engineering	Campbell, G.
	An Analysis of the Crystalline Structure Formation in Online and Offline Samples of Polyethylene and Polypropylene
Schilling, Zachary	2007	Computer Engineering	Koplowtiz, J.
	HAVAC High-speed Autonomous Vehicle with Adaptive motion Control
Schilling, Zachary	2004	Computer Engineering	Conry, S.
	Creation of a Virtual Reality Grocery Store for the Rehabilitation of Head Injury Patients
Schumer, Brent	2003	Mechanical & Aeronautical Engineering	Taylor, J.
	Flow Visualization and Wake Analysis Facility Revitalization
Schuyler, Bradley	2008	Aeronautical Engineering	Shen, H., Orlando, A.
	Direct Shear Simulation
Schwarting, Lindsay	2006	Biology	Langen, T.
	Surveying and Predicting Hotspots of Herpetofauna Mortality on New York State Highways
Searleman, Adam	2004	Biology	Woodworth, C.
	Predicting Cervical Carcinoma Cell Response to Epiderman Growth Factor Receptor Inhibition
Shane, Conner	2005	Mechanical & Aeronautical Engineering	Jah, R.
	Structural Health Monitoring using Linear Time Series Analysis Methods
Shane, Conner	2004	Mechanical & Aeronautical Engineering	Jha, R.
	Structural Damage Protection Using AR-ARX Models
Sharpsten, Anna	2003	Mechanical & Aeronautical Engineering	Valentine, D.
	Unsteady Hydrodynamics of the Swimming of Cetaceans
Shiel, William	2005	Chemical Engineering	Taylor, R.
	Validating a computer-based model of real distillation columns
Sidletsky, Jennifer	2008	Physic	Partch, R.
	Cotton Filters to Reduce Levels of Leached Bisphenol A from Bottled Water Using Pi-Pi Complexes
Sidletsky, Jennifer	2007	Physics	Partch, R.
	Medican and Electronic Applications of Particle Technology
Slaby, Justin	2006	Mechanical & Aeronautical Engineering	Visser, K.
	Tip Vortex Manipulation Using a Sharp Edged Delta Wing
Slaby, Justin	2003	Mechanical & Aeronautical Engineering	Visser, K., Helenbrook, B.
	OVERFLOW: a Computational Fluid Dynamics Code
Smith, Carson	2008	Chemical and Biomolecular Engineering	Krishnan, S.
	Photocrosslinkable Triblock Copolymer Hydrogels for Protein Encapsulation
Smith, Carson	2007	Mechanical Engineering	Issen, K.
	An Investigation into the Inhomogeneous Deformation of Aluminum Foam Under Uniaxial Tension
Smith, Joshua	2003	Electrical & Computer Engineering	Kumar, S.
	Pervasive Computing Review
Smith, Timothy	2008	Computer Science	Searleman, J.
	Creation of a Virtual Reality Game for Training in a Virtual School Environment
Smith, Timothy	2006	Computer Science	Searleman, J.
	Enhancing Realism in a Virtual Environment for Stroke Patient Rehabilitation
Smith, Timothy	2005	Electrical and Computer Engineering and Computer Science	Conry, S. and Searleman, J.
	Improvements to a Game for Virtual Reality Wheelchair Training
Smith-Packard, Bethanny	2004	Biology	Woodworth, C.
	The Effect of NF-kB on Immortalization of Human Cervical Cells by Papillomaviruses
Smith-Packard, Bethanny	2003	Bio-Molecular Science	Peploski, J.
	Refining a DNA Fingerprinting Procedure
Soliani, Anna	2007	Chemical Engineering	Tokarev, I.
	Template-Assisted Fabrication of Organic-Inorganic Hybrid Nanofibers
Soliani, Anna	2006	Chemical Engineering	Minko, S.
	Responsive Materials and Devices Based on Hierarchical Self-Assembly of Functional Hybrid Nanofibers
Soliani, Anna	2005	Physics	Sokolov, I. and Kievsky, Y.
	Morphogenesis of nanostructured particles and their potential applications
Solomakhin, Rouslan	2005	Mathematics and Computer Science	Hesse, W.
	Using Three-Valued Logic Analyzer for Proving Algorithm Correctness
Souva, Matthew	2008	Chemical and Biomolecular Engineering	Suna, I.
	Protein Biosensor Using Electrochemical Impedance Spectroscopy
Souva, Matthew	2007	Chemical Engineering	Rengasamy, R.
	Analysis of Membrane Electrode Assembly Types in High Yield Fuel Cells
Stephens, Jasmine	2008	Psychology
	Developing Protocols to Study How Threats to the Body are Detected and Capture Attention
Strain, Meghann	2006	Biology/Pre-Med	Schulte, J.
	Genetic evolution within the genus Liolaemus
Terrell, Jessica	2007	Chemistry and Biomolecular Science	Shipp, D.
	Synthesis and Characterization of Diblock Copolymers of Poly(N-vinylpyrrolidone) and Siloxane-based Monomers
Thiel, Michael	2003	Physics	Wick, D.
	The Design, Development, and Assessment of an Interactive Engagement Laboratory Experience in Introductory Physics
Timbie, Kelsie	2008	Biology	Woodworth, C.
	Developing a Biosensor for Cervical Cancer
Valyou, Daniel	2008	Mechanical and Aeronautical Engineering
	Preparing and Operating an Unmanned Aerial Vehicle in Support of the Indiana University Nucleation in Forest Environments Campaign
Valyou, Daniel	2007	Aeronautical Engineering	Marzocca, P.
	Flight control, Data Acquisition, and Payload Integration for An Aerosol Sampling Unmanned Aerial Vehicle
Van Kleeck, Melissa	2007	Chemical Engineering	Baltus, R.
	Creation and Characterization of Defects in Nanofiltration Membranes
Van Kleeck, Melissa	2006	Chemical Engineering	Dhaniyala, S.
	Investigation of the Volatility Nano-Cross Flow Differential Mobility Analyzer
Van Kleek, Melissa	2005	Chemical Engineering	Hopke, P.
	Fiber Deposition in Realistic Human Nasal Airway and Lung Bifurcation Models
VanArsdale, Suzanne	2008	Psychology
	Developing Protocols to Study How Threats to the Body are Detected and Capture Attention
Walker, Brett	2008	Chemical Engineering	Taylor, R.
	The Geometry of Separation Process: Optimal Design of Absorption and Stripping
Wang, Zuocheng	2005	Chemical Engineering	Hopke, P.
	Fiber Deposition in Realistic Human Nasal Airway and Lung Bifurcation Models
Watkins, Ryan	2008	Mechanical and Aeronautical Engineering	Jha, R.
	Lamb wave based diagnostics of composite plates using a modified time reversal method
Werther, Dominick	2004	Mechanical & Aeronautical Engineering	Issen, K.
	Diffuse Bifurcation and Strain Localization in Alporas Aluminum Foam
Weston, Ellyn	2007	Interdisciplinary Engineering & Management	Wasserman, M.
	Picket Lines and Distribution Times: An Exploration of the Effectiveness of Traditional Labor-Based Negotiation Models in a Supply Chain Context
Whelan, Matthew	2003	Civil & Environmental Engineering	Janoyan, K.
	Interface Stresses on Laterally Loaded Piles
Williams, Matthew	2004	Biology	Twiss, M.
	SALT 2004: Sodium Chloride Additions to Lakes and its Toxicity ? 2004
Wilton, Katelynn	2007	Computer Science	Searleman, J.
	Design of a Virtual School Environment for Power Wheelchair Training
Wolcott, Mathew	2005	Mechanical & Aeronautical Engineering	Jha, R.
	Stability and Control of UAVs - A Preliminary Study
Worczak, Marianna	2003	Bio-Molecular Science	Woodworth, C.
	Effects of the Epidermal Growth Factor Receptor Inhibitor PD153035 on Gene Expression in Normal Human Cervical Epithelial Cells
Wormsbecher, Kurt	2007	Civil Engineering	Shen, H., and Helenbrook,B
	Scaling Effect on Numerical Simulation of Direct
Wu, Steven	2008	Interdisciplinary Engineering and Management	Moosbrugger, J.
	Tensile Testing of Metal Nanoparticles Printed on Polymer Substrates
Yapa, Sayuri	2008	Mechanical and Aeronautical Engineering	Dhaniyala,S.
	Characterization of Nano-Aerosol Sampling Instrumentation and Development of Data Inversion Algorithms
Yapa, Sayuri	2007	Mechanical Engineering	Dhaniyala, S.
	Characterization of the Soft X-ray Charger