Summer Research Projects

Summer research has proven to be an engine for powerful accomplishments during the summer it is undertaken and after. The SURE research conference abstracts from past summers are included in the database below.

Students participating in the 2008 summer research program can find participant information in the following documents. The transportation Infomration form must be filled out and returned to our office prior to the beginning of the program.

All of the documents linked to on this page are in MicroSoft Word (.doc) format. You may left click on them to open in MS Word or right click to save to your computer.

The projects are listed in alphabetical order by student's last name.


Name Summer Research Area Advisor
  Topic
Allan, Adam 2003 Mathematics Ellingson
  Gaussian Integers

Alstadt, Jonathan 2007 Software Engineering Rodriguez-Perez. P.
  Assistive robotics with BCI

Altieri, Jason 2011 Business Heintzelman, M.
  Impact of Historical District Designation on Housing Prices

Anderson, Mitch 2006 Chemical Engineering Babu, S.V, and Pandija, S.
  Chemical Mechanical Polishing of Copper

Ausfresser, Sigmund 2003 Chemistry Li, Y.
  The Effects of a Hydrotrope on Liposome Permeability

Barr, Alexandria 2008 Electrical and Chemical Engineering Conry, S.
  Whether Novice Programmers are Predisposed to use Behavioral Design Patterns

Barr, Alexandria 2007 Chemical and Biomolecular Engineering Jachuck, R.
  Liquid Film Thickness Measurements in a Horizontally Rotating Cylinder

Bastien, Christopher 2003 Civil & Environmental Engineering Shen, H.
  Computational Simulation of Granular Material Behavior

Bear, Laura 2007 Mechanical and Aeronautical Engineering Dhaniyala, S.
  Developing an Experimental Setup for Boundary Layer Separation Data Collection

Beattie, Kristin 2003 Engineering & Management Menz, F.
  Renewable Energy in the United States: Policy Effectiveness and Economic Issues

Beckingham, Bryan 2004 Chemical Engineering Campbell, G.
  An Analysis of the Surface Roughness of Thin Polymer Films using Laser Image and Scattering

Beckman, Sarah 2003 Bio-Molecular Science Peploski, J.
  Refining a DNA Fingerprinting Procedure

Bell, Melissa 2004 Chemical Engineering Baltus, R.
  Humic Acid Fouling During Ultrafiltration

Bellor, Katherine 2006 Electrical Engineer/Pre-Med Saranov, E. and Schuckers, S.
  Determination of Sleep/Awake State in Infants by Respiratory Analysis

Bingham, Andrew 2004 Mechanical & Aeronautical Engineering Visser, K.
  Construction and Demonstration of a Prototype Spring-Based Tidal Energy Extraction Device

Bingham, Andrew 2003 Mechanical & Aeronautical Engineering Visser, K.
  Computer Modeling of Spring Based Gravitational Tidal Energy Extraction

Boyd, Victoria 2008 Civil and Environmental Engineering Badr, L.
  Mercury Mass Balance in the Adirondack Mountains: Stemflow and Soil Concentrations

Boyd, Victoria 2006 Environmental Engineering Holsen, T.
  Measuring Dissolved Gaseous Mercury in Raquette River

Boyle, Jerry 2004 Mechanical Engineering Dhaniyala, S.
  Development of a Nanometer Crossflow Differential Mobility

Brackett-Rozinsky, Nevin 2008 Mathematics Skufca, J.
  Rolling Pendulum Nonlinear Dynamics

Bronchetti, Colin 2015 Environmental Engineering Grimberg, S.
  Cleaning Renewable Energy: The Iron Sponge

Brown, Sarah 2007 Electrical Engineering Schilling, R.,Schuckers, S.,Sazonov, E.
  A Hands Free Human-Computer Interface Using Processed Head Motion

Brush, David 2004 Mechanical & Aeronautical Engineering Issen, K.
  Compaction Band Formation and Propagation Behavior in Closed Cell Aluminum Foam

Burdick, Kyle 2004 Mathematics & Computer Science Searleman, J.
  Virtual Environment Design & Human Computer Interaction with a Virtual Reality Wheelchair Simulator

Burdick, Noah 2003 Chemical Engineering Campbell, G.
  Temperature Deviation of a Non-Newtonian Fluid from Rheologically Precalculated Temperature Variations

Burl, Jessica 2015 Mathematics Fowler, K.
  Understanding the Impact of Catchment Basins on Berry Farming in the Pajaro Valley

Butkiewicz, Melissa 2008 Chemistry Christiansen, P.
  Biomass Analysis and Screening for Fuel Applications

Callahan, James 2011 Mechanical Engineering Brian Helenbrook
  Computational analysis of airflow around a cylindrical accelerator for optimization of Optiwind turbine platform design

Callahan, James 2011 Aeronautical Engineering Helenbrook, B.
  Computations of Flow Over Cylindrical Cylinders: Comparison to Wind Tunnel Data

Cardin, Andrew 2014 Physics Sokolov, I.
  An Investigation of the Thermal Conductivity of Micron Fibers

Cardin, Andrew 2014 Physics Sokolov, I.
  An Analysis of Topographical Features of Cancerous and Normal Cervical Cells

Chapman, Christina 2011 Sustainable Environment Alan Rossner
  Cookstoves: The World’s Most Common Household Appliance: Evaluation of Particle Emission

Chiaravalle, William 2005 Computer Engineering Carroll, J.
  Preparation of Team 229 for Future Autonomous Implementation

Chiaravalle, William 2004 Computer Engineering Conry, S.
  Creation of a Virtual Reality Grocery Store for the Rehabilitation of Head Injury Patients

Chin, Erika 2014 Civil and Environmental Engineering Yapa, P.
  Hydrothermal Vent Chemical Composition Available for Mining in the Presence of Tube worms (R. pachyptila)

Cipollina, Joseph 2006 Mechanical Engineering Dhaniyala, S.
  Fabrication and Testing of an Aerosol Hydrocarbon Detector

Clarice, Dziak 2008 Matematics Fowler, K., Luttman, A.
  Mathematical Modeling at the Middle Level: The Colton-Pierrepont Project

Clevenger, Jill 2008 Mechanical and Aeronautical Engineering Visser, K., Bohl, D.
  On the Viability of a Wind Driven Thermal Churn

Clevenger, Jill 2012 Mechanical Engineering Fite, K.
  The Design, Fabrication & Implementation of an Actuator & Cable-Driven Mechanical Whirligig Beetle

Coons, Amanda 2008 Mechanical Engineering Issen, K., Morrison, D.
  Low Cycle Fatigue in Aluminum Foam with Notch

Czajkowski, Mark 2007 Mechanical Engineering Visser, K.
  Feasibility of a Unique Wind Powered Home Heating System

Davidson, Bryan 2014 Electrical and Computer Engineering Jemsion, W., Visser, K.
  Electric Vehicle Infrastructure Systems

Davis, Andrew 2007 Biomolecular Science/Math Fowler, K.
  Effects of Saltwater Intrusion on a Costal Aquifer; Henry’s Problem and a Coastal Region of Hersonissos, Crete

Davis, Andrew 2007 Biomolecular Science/Math Fowler, K.
  Grid Dependence of Solutions for Water Supply Management Problems

Davis, Andrew 2006 Biomolecular Science Langen, T.
  Effects of Roads and Fencing on the Microclimate of Turtle Nests

Davis, Michael 2008 Mathematics Mondal, S.
  A Study of the Association of Statistics in EURO 2008

Davis, Eleanor 2008 Applied Math & Statistics Nishikawa, T.
  Effect of Directionality on Synchronizability of Networks

Dayter, Lily 2014 Chemistry and Biomolecular Sciences Shipp, D.
  Synthesis of Vinyl Acetate-Polystyrene Block Copolymers by Using a Single Reversible Addition Fragmentation Chain Transfer Polymerization Agent

Deschenes, Timothy 2003 Mechanical & Aeronautical Engineering Visser, K.
  Tractor Trailer Drag Reduction

Dilai, Khrystyna 2015 Chemistry and Biomolecular Sciences Shipp, D.
  Release of Drug Models from Surface-Eroding Polyanhydrides

DiNatale, Kara 2014 Chemical Engineering Suni, I.
  Electrochemistry and Thin-Film Solar Cells

Dosiek, Luke 2003 Electrical & Computer Engineering Pillay, P.
  Modeling of a Stand Alone Horizontal Axis Wind Turbine

Dreisbach, Emily 2015 Biology Wallace, K.
  Fishing for Answers: The Synthesis and Study of Jagged3 Clones in a Zebrafish Model

Durfee, Benjamin 2007 Civil & Environmental Engineering Grimberg, S.
  Mixing Intensity Effects on Sand Separation in Continuous Mix Anaerobic Manure Digestion

Durfee, Benjamin 2004 Civil & Environmental Engineering Grimberg, S.
  Effects of NAPL Presence and Growth Stage on the Movement of Pseudomonas saccharophilia P15 through Soil Columns

Durrer, Amanda 2014 Mechanical and Aeronautical Engineering Dhaniyala, S.
  Experimental Characterization of a Novel Large Particle Inlet

Eddy, Patrick 2003 Mechanical & Aeronautical Engineering Valentine, D.
  Unsteady Hydrodynamics of the Swimming of Cetaceans

Edmands, Maximillian 2007 Computer Science Searleman, J.
  Design of a Virtual School Environment for Power Wheelchair Training

Edmands, Maximillian 2008 Computer Science Heintzelman, M.
  Analyzing The Social Determinants Of Environmental Behavior Using Networks and Games

Elser, Matthew 2008 Mechanical Engineering Visser, K.
  Design Challenges of an Electric Vehicle And Solutions in Development

Engel, Holly 2008 Environmental Engineering Ojo, T., Bonner, J.
  Culture Growth Monitoring for the Optimization of Biodiesel Precursors in Select Green Algae

Ethier, Dillon 2008 Mathematics Luttman, A.
  What’s in a Norm?

Fetterman, Aaron 2007 Software Engineering Searlman, J.
  Automatic News Summarization Using a Dependency Structure

Fetterman, Aaron 2005 Software Engineering Conry,S.
  Using Multi-Agent Strategies to Solve a Blocks-World Artificial Intelligence Problem

Fischer, Andrea 2004 Chemistry Luck, L.
  The Genetic Engineering of a Poly His Tag on the C-Terminal end of the E.coli Receptor for Glucose and Galactose

Fisher, Kevin 2008 Chemical Engineering Partch, R.
  Testing Varying Reducing Agents and Reaction Conditions in the Conversion of Organic Waste to Fuel Oil

Folts, Christopher 2003 Biology Woodworth, C.
  Preliminary Studies on Engineering of Human Skin Substitutes:Effect of Transforming Growth Factor -?1 on Gene Expression by Skin Cells

Fox, Andrew 2004 Mechanical Engineering Morrison, D/Moosbrugger, J
  Effects of Materials Processing on the Magnetic Properties of Nickel

Frasco, Gerald 2014 Mechanical and Aeronautical Engineering Jha, R.
  Dynamics of a Flexible Composite Wing

Frasco, Gerald 2014 Physics ben-Avraham, D.
  Complex Networks

Fu, Xiaojing 2011 Mathematics Fowler, K.
  Handling Constraints with Derivative-Free Optimization

Fu, Xiaojing 2008 Mathematics Fowler, K., Crimi, M., Jiang, G.
  Understanding the impact of low permeability media on groundwater remediation

Fu, Xiaojing 2008 Mathematics and Computer Science Fowler, K.
  The Effects of Heterogeneities on the Solution to Groundwater Flow Problems

Ganguly, Srabonti 2003 Mathematics & Computer Science Tamon, C.
  Quantum Error Correcting Codes

Gerbig, Chase 2004 Civil & Environmental Engineering Grimberg, S.
  Mercury Complexation with Dissolved Organic Matter as a Function of Redox Potential in Natural Aquatic Systems

Gibbons, Zachary 2007 Mechanical and Aeronautical Engineering Marzocca, P.
  Flight control, Data Acquisition, and Payload Integration for An Aerosol Sampling Unmanned Aerial

Gilbert, Christopher 2008 Chemical and Biomolecular Engineering Subramanian, R.S.
  Behavior of Drops Undergoing Thermocapillary Motion on a Solid Horizontal Surface

Gilbert, Christopher 2007 Chemical and Biomolecular Engineering Subramanian, R.S.
  Thermocapillary Motion of a Liquid Drop on a Horizontal Solid Surface

Gilbert, Christopher 2006 Chemical Engineering Subramanian, R.S.
  The Effect of Temperature on the Contact Angle of a Drop on a Surface

Gilbert, Christopher 2005 Chemical Engineering Subramanian, R.S.
  A Study of the Contact Angle of Drops on a Solid Silicon Surface That Has Been Treated to Produce a Wettability Gradient

Glave, Theodore 2011 Chemical Engineering McLaughlin, J.
  Novel Nanocomposite Materials for Solar Cell Fabrication

Gorton, Samuel 2006 Chemical Engineering Jachuck, R.
  Desktop Biodiesel Plant

Gorton, Samuel 2004 Chemical Engineering Campbell, G.
  Viscoelastic Creep in Polymer Parts Molded at Various Injection Molding Processing Conditions

Grayson, Courtney 2006 BioMolecular Science Woodworth, C.
  Development and Optimization of a Reporter Gene Assay to Measure NF-kB Activation by Human Papillomaviruses in Cervical Cells

Grayson, Courtney 2005 Bio-Molecular Science Christiansen, P.
  Simple Procedure for Characterizing Transesterification Reactions

Greening, Nelson 2005 Interdisciplinary Engineering and Management Carroll, J., Ensby, M., Searleman, J.
  Virtual Product Development and its effect on New Product Development

Grzeshowiak, Dustin 2008 Mathematics Heintzelman, M.
  A Spatial Approach to Explicating the Appearance & Passage of Community Preservation Act Referenda in Massachusetts

Grzeskowiak, Dustin 2008 Finance Nocetti, D.
  The American Housing Crisis: An Economic Analysis Outlining Causative Factors

Gucwa, Kevin 2008 Mechanical and Aeronautical Engineeing Dhaniyala, S.
  Droplet Splattering: Measurement of Secondary Particle Size Distributions

Gucwa, Kevin 2007 Interdisciplinary Mechanical and Aeronautical Engineering Moharrei, A.,Dhaniyala, S.
  Boundary Layer Separation Analysis: Automated Image Analysis Technique

Gumuka, Michael 2004 Physics Wick, D.
  An Impulse Based Assessment of Training Style Differences Taekwondo Techniques

Hackett, Katelynn 2014 Mechanical Engineering Fite, K.
  A Partial Weight Bearing Reminder Device for Lower-Limb Rehabilitation

Hancock, Kyle 2014 Chemical Engineering Taylor, R.
  Effectiveness of Mathematical Models for Surface Tension Calculations in Distillation Processes

Hart, Philip 2011 Electrical Engineering Fulk, G.; Sazonov, E.
  Design of a User Interface for Visualization of a Patient’s Activity Data

Hemsing, Frank 2012 Mechanical Engineering Robinson, C.
  Perceptual, Biomechanical, and EMG Response Latencies in Potentially Destabilizing Anterior Horizontal Translations

Hemsing, Frank 2012 Mechanical Engineering Robinson, C.
  Analysis of First Trial Response to a Potentially Destabilizing Anterior Horiozontal Translation

Hemsing, Frank 2008 Mechanical and Aeronautical Engineering Marzocca, P.
  Modeling and Experimentation of a Flutter Like Aeroelastic Power Source (FLAPS)

Hemsing, Frank 2012 Mechanical and Aeronautical Engineering Robinson, C.
  Analyzing the Biomechanical Responses of Blindfolded Humans to Large Horizontal Anterior Perturbations of a Sliding Platform

Hemsing, Frank 2012 Chemical Engineering Robinson, C.
  Assessment of Physical and Muscular Accomodations to Repeated Potentially Destabilizing Anterior Horizontal Translations

Hilbert, Brian 2012 Mechanical and Aeronautical Engineering Bohl, D.
  Drag Reduction on Aerodynamic Shapes with Ground Effect

Hilbert, Brian 2008 Mechanical Engineering Bohl, D
  Experimental Study of Mixing Characteristics at low Reynolds Number in a Simple Batch Mixer

Hoffman, Lindsay 2006 Civil & Environmental Engineering Grimberg, S.
  The Effects of Varying Redox Conditions on Bacterial Communities in Mercury-Contaminated Soil

Hoffman, Lindsay 2004 Civil & Environmental Engineering Young, T.
  Predicting the Volumn of Runoff Annually from the Cascade Lakes

Holloway, Jason 2007 Biomedical and Chemical Engineering Rengaswamy, R., Campbell, G.
  Controlling Dual-Polymer Membrane Manufacture for PEM Fuel Cells and Interfacing Mass-Flow Controls with an Electronic Load Mainframe

Holloway, Jason 2008 Electrical Engineering and Physics Luttman, A.
  Using Optical Flow for Botanical Video Analysis

Horn, Daniel J. 2015 Chemistry and Biomolecular Sciences Christiansen, P.
  Optimization of Enzyme Crosslinking for Combined Hydrolysis & Fuel Ethanol Fermentation

Howard, Colin 2014 Chemical Engineering Goia, D.
  The Precipitation of Ni Particles

Ibeneche, Onyinyechi 2003 Electrical Engineering Ziarani, A.
  Implementation of a Medical Device for Testing the Functionality of the Ear in Newborns

Illig, David 2008 Computer Engineering Schuckers, S.
  Determination of the Effects of Exposure to Diesel Exhaust on Potsdam Schoolchildren

James, Davis 2008 Computer Science Fulton, S.
  Using MATLAB and Multigrid to Save the World

Jedamski, Devon 2013 Aeronautical Engineering Visser, K.
  The Optimization of Diffuser Augmented Wind Turbines

Jha, Pushpak 2011 Electrical Engineering Fite, K.
  Experimental Characterization of Lithium Polymer Battery Charging Cycles During Bilateral Engergy Exchange in Power-Autonomous Systems

Jha, Pushpak 2008 Electrical and Mechanical Engineering Fite, K.
  Data Acquisition and Analysis for the Design of a Powered Prosthetic Leg

Jha, Pushpak 2008 Electrical Engineering Hua, F.
  The Fabrication and Uses of Nano-Polymers

Johnson, Robert 2014 Mechanical and Aeronautical Engineering Dhaniyala, S.
  Testing and Analysis of the Performance of a Virtual Impactor

Johnson, Robert 2014 Mechanical and Aeronautical Engineering Visser, K.
  Ultralight Vacuum Chamber for use in Airship Design

Jones, Matthew 2005 Mechanical and Aeronautical Engineering Visser, K.
  Analysis of Wake Flows for Induced Drag Reduction

Kafka, Orion 2014 Mechanical and Aeronautical Engineering Issen, K.
  Characteriation of Fatigued Induced Fractures in Aluminum Foam using X-Ray Computed Topography

Kahabka, Matthew 2014 Chemistry and Biomolecular Sciences Roiter, Y., Minko, S.
  Locking Magnetic Particles

Kennedy, Rose 2012 Civil and Environmental Engineering Peethamparan, S.
  Alkali-Activated Concrete:Alkali-Silica Reaction

Kennedy, Erin 2008 Electrical and Computer Engineering Carroll, J.
  Socializing a Social Robot with an Artificial Society

Kopra, Christopher 2008 Chemical and Biomolecular Engineering Rasmussen, D.
  Sodium Borohydride Hydrolysis to Generate Hydrogen for Fuel Cells

Kopra, Christopher 2007 Civil and Environmental Engineering Janoyan, K.
  Structural Evaluation and Monitoring of Truss Bridges in New York State

Ladew, Matthew 2008 Electrical Engineering Carroll, J.
  Portable Pulse Oximetry

Ladew, Matthew 2011 Electrical Engineering Fulk, G.; Sazonov, E.
  Testing of the Validity of a Device to Monitor Activity

Lanahan, Matthew 2007 Electrical Engineering Meyer, R.
  HAVAC High-speed Autonomous Vehicle with Adaptive motion Control

Lanahan, Matthew 2005 Electrical Engineering Carroll, J.
  Preparation of Team 229 for Future Autonomous Implementation

Landau, Elias 2007 Aeronautical and Mechanical Engineering Bohl, D.
  Velocity and vorticity field of a Synthetic Jet

Landauer, Alexander 2014 Mechanical and Aeronautical Engineering Kuxhaus, L.
  A Model to Predict Soft Tissue Effects on Elbow Stiffness

Lang, Maria 2008 Mechanical Engineering Dhaniyala, S.
  Characterization of Electrospray Aerosol Generator

Laramie, Sydney 2013 Chemical Engineering Krishnan, S.
  Identifying Structure-Property Correlations for Ionic Liquids

Laramie, Sydney 2008 Chemical Engineering Krishnan, S.
  Comparing the Current and Voltage Characteristics of a Dye-Sensitized Solar Cell to a Crystalline Silicon Solar Cell

Lawney, Brian 2003 Civil & Environmental Engineering Shen, H.
  Dynamics of Sea Ice Floes

Leach, Brendan 2008 Chemical Engineering Campbell, G.
  Design and Fabrication of a Light Weight Planar Proton Exchange Membrane Fuel Cell

Leach, Brendan 2011 Mechanical Engineering Dhaniyala, S.
  Diesel Emission Characteristics: Chassis-Dynamometer Measurements with a Light-Duty Truck

Lowenstein, Keegan 2008 Computer Science Dowman, R.
  A Toolkit for Developing Neural Network Models of how the Brain Detects and Orients Attention toward Threat

Lowenstein, Keegan 2008 Computer Science and Psychology Dowman, R.
  Modeling the Brain Mechanisms of Detecting and Orienting Attention towards Threat

Mangan, Niall 2005 Physics benAvraham, D.
  Mathematical Methods for Analysis of Diffusion

Mangan, Niall 2004 Biology Moczydlowski, E.
  Stable Expression of Recombinant Saxiphilin in Insect and Yeast Cells for Large Scale Production and Purification

Mao, Zhimin 2005 Business Mahmoodi, F.
  Optimize the Supply Chain of a Major Office Equipment/Automation Company

Marker, Daniel 2004 Biology Woodworth, C.
  Activation of NF-?B in Human Epithelial Cells Expressing Human Papillomavirus (HPV) Oncogenes

Marshall, Norman 2003 Chemistry Li, Y.
  A Mechanistic Study of the Formulation fo Liposome-Stabilized Microbubbles Using Nuclear Magnetic Resonance

Marshall, Nicholas 2014 Mathematics Skufca, J., Twiss, M.
  Data Mining Applications in St. Lawrence River Ecology

McCrum, Ian 2012 Civil and Environmental Engineering Grimberg, S.
  The DARIES Model: Modelling Co-Digestion and Multi-Phase Digester Systems

McCurry, Mark 2012 Electrical Engineering Meyer, R.
  Efficient FPGA Based Subtractive Synthesis Implementation

McGuffey, Charles 2015 Electrical and Computer Engineering Cheng, M.
  Thermal Effects on Characteristics of Single Junction Silicon Photovoltaic Cells

McKeever, Eric 2003 Mechanical & Aeronautical Engineering Dhaniyala, S.
  Design and Development of a Sub-micorn Electrical Particle Counter

McKinney, Christopher 2013 Chemistry Christiansen, P.
  Biocatalytic Alginate Microreactors for Simultaneous Isomerization and Fermentation of D-xylose of Fuel Ethanol

McNulty, Nicholas 2015 Electrical and Computer Engineering Jemsion, W., Visser, K.
  The Functionality of Electric Vehicles on the Clarkson Campus

Mead, Sarah 2015 Mechanical and Aeronautical Engineering Valentine, D.
  Rotating Flows & Cylinders: A Simple Mixing Device

Melissa, Butkiewicz 2011 Biomolecular Science Darie, C.
  Identification of Serum Protein Biomarkers for Autistic Spectrum Disorder

Merchant, Francesca 2008 Chemistry Simonelli, C., Partch, R.
  Conjugation of Green Fluorescent Protein to Gold Nanoparticles and Nanoshells for Photothermal Cancer Therapy Imaging

Mihajlovik, Vidoje 2006 Software Engineering/ Humanities Searleman, J.
  Enhancing Realism in a Virtual Environment for Stroke Patient Rehabilitation

Miller, Laniece 2006 Chemical Engineering Rossner, A.
  Evaluation of Holdup Measurement Models by Use of Facility Simulation

Miller, Laniece 2004 Chemical Engineering Campbell, G.
  Mixing and Particle Tracking in a Single Screw Extruder

Minick, Mark 2012 Mathematics Fowler, K.
  Optimizing Aquifer Water Consumption and Maximizing Profit for Strawberry Farmers in Pajaro Family, California

Moeller, Michael 2008 Physics Wick, D., Ramsdell, M.
  Mathematical Model for a Virtual Coaster

Moeller, Michael 2008 Mechanical and Aeronautical Engineeting Visser, K.
  Analysis of Diffuser Augmented Wind Turbines

Moeller, Michael 2007 Mechanical and Aeronautical Engineering Jha, R.
  Fabrication of Composite Laminates Using a Vacuum Bag Process

Moore, Nathan 2008 Environmental Science and Policy Langen, T.
  A Survey & Management Plan for Vernal Pools on the Campus of Clarkson University

Nadeau, Andrew 2008 Electrical and Computer Engineering Kandaswamy, U.
  Iris Identification from a Distance

Nelson, Lisa 2008 Chemical and Biomolecular Engineering Taylor, R.
  Modeling of Energy Efficient Complex Distillation Columns

Nelson, Lisa 2007 Chemical Engineering Taylor, R.
  Modeling of Energy Efficient Dividing-Wall Distillation Columns

Northrup, Ryan 2008 Mathematics and Computer Science Fowler, K.
  Numerical Approaches to Initial Value Problems using Interval Mathematics

Nuhfer, Dustin 2007 Engineering Holson, T.
  The Effects of Solar Radiation on Dissolved Gaseous Mercury Variations in the Raquette River

Olson, David 2008 Mechanical and Aeronautical Engineering Visser, K.
  Self-Starting Contra-Rotating Vertical Axis Wind Turbine for Home Heating Applications

Onyewuchi, Stanley 2008 Electrial Engineering Schuckers, S.
  Biometrics Spook &Live Finger Collection Using Optical and Capacitive Scanners

Onyewuchi, Stanley 2007 Electrical Engineering Carroll, J.
  Robotic and Signal Processing Application and Manipulation Using Embedded Systems

Owen, Manley 2011 Computer Engineering Carroll, J.
  Breathing Detection in a Portable Apnia Detection Unit

Parmalee, Bethann 2012 Environmental Engineering Powers, S.; Twiss, M.
  The Use of Landfill Leachate and Waste Heat to Sustainably Grow Algae for Biodiesel Production

Pascucci, Vincent 2008 Chemical Engineering Jachuck, R.
  Photoinitiated Copolymerization Using a Narrow Channel Reactor

Pascucci, Vincent 2005 Chemical Engineering Rasmussen, D.
  The Synthesis of Aerogels to Separate Particles

Perline, Kyle 2012 Aeronautical Engineering Helenbrook, B.
  A Hybrid Level-Set/Moving-Mesh Interface Tracking Method

Perline, Kyle 2012 Mechanical and Aeronautical Engineering Helenbrook, B.
  Modeling Two-Phase Flows with Surface Tension using the Ghost Fluid Method

Petko, Danielle 2004 Cemistry Shipp, D.
  Synthesis of Poly(Methacrylic Acid) using RAFT Polymerization

Petruczok, Christy 2005 Chemical Engineering Shipp, D.
  Synthesis of Silica-Strengthened Poly (methylmethacrylate) Using Reversible Addition-Fragmentation Chain Transfer Polymerization

Price, Katherine 2014 Physics Sokolov, I.
  Nano-Physiology of Drosophila Heart

Pudlo, Jeffery 2008 Aeronautical Engineering Jha, R.
  A Study of Composite Strength Calculation

Purdy, Katherine 2008 Mathematics Fowler, K., Luttman, A.
  Mathematical Modeling of School Lunch Line

Racette, Louis 2013 Mathematics Luttman, A.
  Visualizing Data in More Than Three Dimensions

Reardon, Bridget 2006 Mechanical & Aeronautical Engineering Issen, K.
  Effect of Mass Distribution on Deformation of Three Dimensional Open-Celled Porous Materials Under Uniaxial Compression

Reardon, Bridget 2004 Mechanical & Aeronautical Engineering Issen, K.
  Effect of Negative Poisson's Ratio on Compaction Bands in Foam

Rector, M. Curtis 2004 Mechanical & Aeronautical Engineering Visser, K.
  The Effect of Blade Pitch on Small Multi-Bladed Horizontal-Axis Wind Turbines

Ricci, Justin 2005 Mechanical & Aeronautical Engineering Cetinkaya, C.
  MEMS Rotational Oscillators for Liquid-Phase Sensors

Riley, Courtney 2006 Biomolecular Science Woodworth, C.
  Comparison of NF-kB Baseline Activity in Normal, Immortal, and Tumor Cells

Riley, Courtney 2005 Biology Woodworth, C.
  Development and Optimization of a Reporter Gene Assay to Measure Activation of NF-kB

Ritz, Benjamin 2013 Chemical Engineering Fowler, K.
  Modeling the Spread of Poryphic Hemophilia

Ritz, Benjamin 2008 Mathematics Fowler, K., Luttman, A.
  Mathematical Modeling: Gateway to Creativity in Mathematics

Ritz, Benjamin 2013 Mathematics Fowler, K.
  A Hybrid Genetic Algorithm with Implicit Filtering for Mixed Integer Optimization Problems

Rivera, Brandon 2013 Civil Engineering Neithaleth, N.
  An Exploratory Study on the Use of Phase Change Materials as a Concrete Ingredient for Effective Thermal Management of Building Indoors

Rivera, Brandon 2008 Civil Engineering Neithaleth, N.
  Properties of Early Age Cement Paste with Glass Powder Replacement

Ronan, Michael 2005 Mechanical & Aeronautical Engineering Visser, K.
  Effect of Vertical Splitter Plates on the Performance of a Diffuser Equipped Bluff Body

Roper, Jennifer 2008 Psychology
  Developing Protocols to Study How Threats to the Body are Detected and Capture Attention

Roper, Jennifer 2008 Biology Schulte, J.
  Analysis of Phylogenetic Relationships Within Liolaemus boulengeri Group Lizards Using Nuclear DNA

Rose, Adam 2006 University Studies Fowler, K.
  Polymer Filter Optimization with non-Newtonian Methods

Rose, Adam 2005 Biology Langen, Tom
  Success of Snapping Turtle (Chelydra serpentina) Nests Constructed along Paved Roads

Russell, Paul 2011 Electrical and Computer Engineering Cheng, M.-C.
  A Physics Based Thermal Circuit Model for FinFETs

Salisbury, Andrew 2013 Mechanical and Aeronautical Engineering Visser, K.
  Transient Wind Behavior Effects on Wind Turbine

Sarponmaah, Sylvia 2005 Biology Woodworth, C.
  Development and Optimization of a Reporter Gene Assay to Measure Activation of NF-kB

Savage, Samuel 2008 Computer Science and Engineering Conry, S.
  A Graphical System for Debugging World of Warcraft User Interface Scripts Enhanced with Automation

Savage, Samuel 2007 Electrical and Computer Engineering and Computer Science Conry, S.
  Artificial Intelligence

Savage, Samuel 2006 Software Engineering Hesse, W.
  Open Graphics Language Shading Language

Savage, Samuel 2005 Electrical and Computer Engineering and Computer Science Conry, S. and Searleman, J.
  Improvements to a Game for Virtual Reality Wheelchair Training

Schaefer, Justen 2003 Chemical Engineering Campbell, G.
  An Analysis of the Crystalline Structure Formation in Online and Offline Samples of Polyethylene and Polypropylene

Schilling, Zachary 2007 Computer Engineering Koplowtiz, J.
  HAVAC High-speed Autonomous Vehicle with Adaptive motion Control

Schilling, Zachary 2004 Computer Engineering Conry, S.
  Creation of a Virtual Reality Grocery Store for the Rehabilitation of Head Injury Patients

Schilling, Rebecca 2008 Biology Vandermark, E., Woodworth, C.
  Activation of Nuclear Factor Kappa Beta

Schumer, Brent 2003 Mechanical & Aeronautical Engineering Taylor, J.
  Flow Visualization and Wake Analysis Facility Revitalization

Schuyler, Bradley 2008 Aeronautical Engineering Shen, H., Orlando, A.
  Direct Shear Simulation

Schwarting, Lindsay 2006 Biology Langen, T.
  Surveying and Predicting Hotspots of Herpetofauna Mortality on New York State Highways

Searleman, Adam 2004 Biology Woodworth, C.
  Predicting Cervical Carcinoma Cell Response to Epiderman Growth Factor Receptor Inhibition

Shane, Conner 2005 Mechanical & Aeronautical Engineering Jah, R.
  Structural Health Monitoring using Linear Time Series Analysis Methods

Shane, Conner 2004 Mechanical & Aeronautical Engineering Jha, R.
  Structural Damage Protection Using AR-ARX Models

Sharpsten, Anna 2003 Mechanical & Aeronautical Engineering Valentine, D.
  Unsteady Hydrodynamics of the Swimming of Cetaceans

Sheldon, Andrew 2011 Electrical Engineering Remus, J.
  Development of a Mobile Real-Time LIBS Detection Device

Shiel, William 2005 Chemical Engineering Taylor, R.
  Validating a computer-based model of real distillation columns

Sidletsky, Jennifer 2008 Physic Partch, R.
  Cotton Filters to Reduce Levels of Leached Bisphenol A from Bottled Water Using Pi-Pi Complexes

Sidletsky, Jennifer 2007 Physics Partch, R.
  Medican and Electronic Applications of Particle Technology

Sidletsky, Jennifer 2008 Chemistry Partch, R.
  Synthesis Of Biocompatible Copper Nanoparticles For Cancer Chemotherapy

Sidletsky, Jennifer 2011 Chemistry and Biomolecular Science Melman, A.
  Capping of Nanoporous Materials for the Preparation of Fluorescent Biomarkers and Smart Drug Delivery Systems

Slaby, Justin 2006 Mechanical & Aeronautical Engineering Visser, K.
  Tip Vortex Manipulation Using a Sharp Edged Delta Wing

Slaby, Justin 2003 Mechanical & Aeronautical Engineering Visser, K., Helenbrook, B.
  OVERFLOW: a Computational Fluid Dynamics Code

Slaugh, Eric 2015 Biology Skufca, J., Twiss, M.
  Are Submerged Aquatic Vegetation a Sink for Phytoplankton in the St. Lawrence River?

Smith, Ian 2015 Mechanical and Aeronautical Engineering Visser, K.
  Compression of Natural Gas as use of Wind Turbine Energy

Smith, Carson 2008 Chemical and Biomolecular Engineering Krishnan, S.
  Photocrosslinkable Triblock Copolymer Hydrogels for Protein Encapsulation

Smith, Carson 2007 Mechanical Engineering Issen, K.
  An Investigation into the Inhomogeneous Deformation of Aluminum Foam Under Uniaxial Tension

Smith, Joshua 2003 Electrical & Computer Engineering Kumar, S.
  Pervasive Computing Review

Smith, Timothy 2008 Computer Science Searleman, J.
  Creation of a Virtual Reality Game for Training in a Virtual School Environment

Smith, Timothy 2006 Computer Science Searleman, J.
  Enhancing Realism in a Virtual Environment for Stroke Patient Rehabilitation

Smith, Timothy 2005 Electrical and Computer Engineering and Computer Science Conry, S. and Searleman, J.
  Improvements to a Game for Virtual Reality Wheelchair Training

Smith-Packard, Bethanny 2004 Biology Woodworth, C.
  The Effect of NF-kB on Immortalization of Human Cervical Cells by Papillomaviruses

Smith-Packard, Bethanny 2003 Bio-Molecular Science Peploski, J.
  Refining a DNA Fingerprinting Procedure

Soliani, Anna 2007 Chemical Engineering Tokarev, I.
  Template-Assisted Fabrication of Organic-Inorganic Hybrid Nanofibers

Soliani, Anna 2006 Chemical Engineering Minko, S.
  Responsive Materials and Devices Based on Hierarchical Self-Assembly of Functional Hybrid Nanofibers

Soliani, Anna 2005 Physics Sokolov, I. and Kievsky, Y.
  Morphogenesis of nanostructured particles and their potential applications

Solomakhin, Rouslan 2005 Mathematics and Computer Science Hesse, W.
  Using Three-Valued Logic Analyzer for Proving Algorithm Correctness

Somaratna, Jeevaka 2008 Civil and Environmental Engineering Neithaleth, N.
  Concretes containing no cement: An investigation on the effects of temperature curing on strength

Souva, Matthew 2008 Chemical and Biomolecular Engineering Suni, I.
  Effective Thickness of Polymer Monolayers on Degenerate Si

Souva, Matthew 2008 Chemical and Biomolecular Engineering Suna, I.
  Protein Biosensor Using Electrochemical Impedance Spectroscopy

Souva, Matthew 2007 Chemical Engineering Rengasamy, R.
  Analysis of Membrane Electrode Assembly Types in High Yield Fuel Cells

Stefano, Emily 2008 Mechanical Engineering Fite, K., Luttman, A.
  The Physics and Engineering of Skateboarding’s MegaRamp

Stephens, Jasmine 2008 Psychology
  Developing Protocols to Study How Threats to the Body are Detected and Capture Attention

Strain, Meghann 2006 Biology/Pre-Med Schulte, J.
  Genetic evolution within the genus Liolaemus

String, Gabrielle 2011 Mechanical and Aeronautical Engineering Visser, K.
  Feasibility of a Regenerative Breaking System for a School Bus

Supatpitak, Nateenond 2013 Mechanical and Aeronautical Engineering Bohl, D.
  Lift Generation on an Airfoil in a Semi-Closed Pipe

Terrell, Jessica 2007 Chemistry and Biomolecular Science Shipp, D.
  Synthesis and Characterization of Diblock Copolymers of Poly(N-vinylpyrrolidone) and Siloxane-based Monomers

Thiel, Michael 2003 Physics Wick, D.
  The Design, Development, and Assessment of an Interactive Engagement Laboratory Experience in Introductory Physics

Timbie, Kelsie 2008 Biology Woodworth, C.
  Developing a Biosensor for Cervical Cancer

Toia, Alyssa 2013 Psychology Dowman, R.
  Cognitive Processes Underlying the Attentional Bias towards Biological Threats

Traphagen, Nicole 2014 Chemistry and Biomolecular Sciences Shipp, D.
  Drug Release Kinetics from Polyanhydrides

Turose, Chase 2015 Electrical Engineering Wu, L.
  An Introduction to the Benefits of Variable Pricing of Electricity

Valyou, Daniel 2008 Mechanical and Aeronautical Engineering
  Preparing and Operating an Unmanned Aerial Vehicle in Support of the Indiana University Nucleation in Forest Environments Campaign

Valyou, Daniel 2007 Aeronautical Engineering Marzocca, P.
  Flight control, Data Acquisition, and Payload Integration for An Aerosol Sampling Unmanned Aerial Vehicle

Valyou, Daniel 2011 Aeronautical Engineering MArzocca, P.
  Structural and Manufacturing Design of a Research Unmanned Aerial Vehicle

Van Kleeck, Melissa 2007 Chemical Engineering Baltus, R.
  Creation and Characterization of Defects in Nanofiltration Membranes

Van Kleeck, Melissa 2006 Chemical Engineering Dhaniyala, S.
  Investigation of the Volatility Nano-Cross Flow Differential Mobility Analyzer

Van Kleek, Melissa 2005 Chemical Engineering Hopke, P.
  Fiber Deposition in Realistic Human Nasal Airway and Lung Bifurcation Models

Van Luipen, Jason 2008 Aeronautical Engineering Bohl, D.
  Vortex Ring Interaction with Permeable Media

VanArsdale, Suzanne 2008 Psychology
  Developing Protocols to Study How Threats to the Body are Detected and Capture Attention

Victoria, Boyd 2008 Environmental Engineering Grimberg, S., Holsen, T., Engstrom, J., Nichols, R.
  Passive filtration and retention of stormwater runoff from an aluminum smelter

Walker, Brett 2008 Chemical Engineering Taylor, R.
  Thermodynamic Modeling Using the PC-SAFT Equation of State

Walker, Brett 2012 Chemical Engineering Taylor, R.
  The Influence of Mass Transfer on Energy Efficient Distillation Design

Walker, Brett 2008 Chemical Engineering Taylor, R.
  The Geometry of Separation Process: Optimal Design of Absorption and Stripping

Walker, Brett 2012 Chemistry and Biomolecular Sciences Taylor, R.
  Modeling Engergy Efficient Distillation Columns while Accounting for Mass Transfer Influences

Wang, Ruisheng 2015 Mechanical and Aeronautical Engineering Jha, R.
  Prediction and Verification of Young’s Modulus for a Composite Laminate

Wang, Zuocheng 2005 Chemical Engineering Hopke, P.
  Fiber Deposition in Realistic Human Nasal Airway and Lung Bifurcation Models

Watkins, Ryan 2008 Mechanical and Aeronautical Engineering Jha, R.
  Lamb wave based diagnostics of composite plates using a modified time reversal method

Wegner, Andrew 2015 Chemistry and Biomolecular Sciences Darie, C.
  Introduction to Proteomics and its use to Identify Serum Biomarkers

Weiner, Daniel 2012 Mechanical Engineering Bohl, D.
  Using a Cambered Auxilary Blade to Increase the Lift and Efficiency of a Clark Airfoil

Werther, Dominick 2004 Mechanical & Aeronautical Engineering Issen, K.
  Diffuse Bifurcation and Strain Localization in Alporas Aluminum Foam

Weston, Ellyn 2007 Interdisciplinary Engineering & Management Wasserman, M.
  Picket Lines and Distribution Times: An Exploration of the Effectiveness of Traditional Labor-Based Negotiation Models in a Supply Chain Context

Whelan, Matthew 2003 Civil & Environmental Engineering Janoyan, K.
  Interface Stresses on Laterally Loaded Piles

Williams, Matthew 2004 Biology Twiss, M.
  SALT 2004: Sodium Chloride Additions to Lakes and its Toxicity ? 2004

Wilton, Katelynn 2007 Computer Science Searleman, J.
  Design of a Virtual School Environment for Power Wheelchair Training

Wolcott, Mathew 2005 Mechanical & Aeronautical Engineering Jha, R.
  Stability and Control of UAVs - A Preliminary Study

Worczak, Marianna 2003 Bio-Molecular Science Woodworth, C.
  Effects of the Epidermal Growth Factor Receptor Inhibitor PD153035 on Gene Expression in Normal Human Cervical Epithelial Cells

Wormsbecher, Kurt 2007 Civil Engineering Shen, H., and Helenbrook,B
  Scaling Effect on Numerical Simulation of Direct

Wu, Steven 2008 Interdisciplinary Engineering and Management Moosbrugger, J.
  Tensile Testing of Metal Nanoparticles Printed on Polymer Substrates

Wu, Steven 2009 Mechanical Engineering Moosbrugger, J.
  Adhesion Testing of Printed Metallic Inks on Various Substrates

Yancey, Kenneth 2009 Biology Woodworth, C.
  Changes in Reactive Oxygen as a Mechanism for NF-kb Activation

Yang, Pinguang 2014 Biomolecular Science Melman, A.
  Photochemical Reduction of Fe3+ in Organic Environment

Yapa, Sayuri 2008 Mechanical and Aeronautical Engineering Dhaniyala,S.
  Characterization of Nano-Aerosol Sampling Instrumentation and Development of Data Inversion Algorithms

Yapa, Sayuri 2007 Mechanical Engineering Dhaniyala, S.
  Characterization of the Soft X-ray Charger

Yapa, Sayuri 2006 Mechanical Engineering Dhaniyala, S.
  Investigating Boundary Layer Separation around a Blunt Body

Zhang, Guangtao 2009 Mechanical and Aeronautical Engineering Dubey, P., Dhaniyala, S.
  Differential Mobility Analyzer Testing

Zhao, Yijia 2013 Environmental Science and Policy Rossner, A.
  UFPs Generated During Cooking with an Electric Stove

Zielewicz, Laura 2014 Chemistry and Biomolecular Science Darie, C.
  Screening for Low Molecular Weight Serum Protein Biomarkers for Prostate and Cervical Cancer