Background Image

CAMP's Annual Technical Meeting 2015

In this Section

CAMP Annual Technical Meeting 2015 Presentations (Password required)

Wednesday, May 20

11:30 - 1:30 PM Check in & enjoy the grounds

1:30 - 1:35 PM Opening Remarks – Grand Ballroom
S.V. Babu, Director, CAMP & Distinguished University Professor, Clarkson University

1:35 - 2:00 PM Metal-Organic Frameworks as Versatile Storage and Separation Platforms
-- Darpandeep Aulakh, Department of Chemistry & Biomolecular Science, Clarkson University

2:00 - 2:25 PM Graphene Nanoribbons for Optoelectronic Devices -- Alan Rae, Executive Director, IncubatorWorks Inc.

2:25- 2:50 PM Design of Electrode Microstructures that Bridge Supercapacitors and Batteries -- David Mitlin, Professor and GE Chair in Oil and Gas Systems, Clarkson University

2:50 - 3:15 PM Design Principles for Graphene-Based Materials to Enhance Supercapacitor Performance -- Eunsu Paek, Assistant Professor, Chemical & Biomolecular Engineering, Clarkson University

3:15 - 3:40 PM Break

3:40 - 4:05 PM Efforts to Grow Stem Cell Derived Cardiomyocytes on Biological Scaffolds -- Matthew Betzenhauser, Acting Director of Research, Masonic Medical Research
Laboratory

4:05 - 4:30 PM Chemical Deposition of Hermetic Silver Shells on Copper Particles -- Dan Goia, CAMP Distinguished Professor of Chemistry & Biomolecular Science, Clarkson University

4:30 - 4:55 PM Metallic/Ceramic Multilayer Composites as Corrosion Resistance Coatings -- Ioannis Mastorakos, Assistant Professor, Department of Mechanical & Aeronautical Engineering, Clarkson University

4:55 - 5:20 PM Characterization of Nanoscale Viscoelastic Properties of Gold Reinforced Chitosan Nanocomposites Using Nanoindentation Reinforced Chitosan Nanocomposites Using Nanoindentation -- Philip Yuya, Assistant Professor, Mechanical & Aeronautical Engineering, Clarkson University

5:20 - 5:45 PM Integrated Occupancy-Based Energy Management -- Steve McMahon, CEO/Founder, Cortland Research, LLC

5:45 - 6:30 PM Reception - Tent

6:30 - 8:15 PM Dinner – Grand Ballroom

8:00 PM Introduction: Tony Collins, President, Clarkson University

8:05 PM Keynote address: What the Technology Industry Needs from Universities -- Gautam Meda, Research Director for Modeling & Simulation, Corning, Inc.

Thursday, May 21

7:00 - 8:00 AM Breakfast – The Inn on the Lake’s Restaurant

8:00 - 8:05 AM Introduction Grand Ballroom -- S.V. Babu, Director, CAMP & Distinguished University Professor, Clarkson University

8:05 - 8:30 AM Electromagnetic Properties of Resonant and Non-Resonant Composite Metamaterials -- Mike Fiddy, Founding Director, Center for Optoelectronics, Site Director, Center for Metamaterials, University of North Carolina at Charlotte

8:30 - 8:55 AM Integrating Nanoscale Materials and Photonics for Enhanced Energy Conversion and Healthcare Applications -- Zijie Yan, Assistant Professor, Chemical & Biomolecular Engineering, Clarkson University

8:55 - 9:20 AM Patterned by Printing – Processes & Materials for High-Performance Electronics -- Carolyn Ellinger, Research Associate, Eastman Kodak

9:20 - 9:45 AM Direct Capillary Printing for Medical Device Manufacture -- William Grande, Vice President, Micropen Technologies Corporation

9:45 - 10:10 AM Additive Manufacturing in Metals: Characterization and Modification of Local Microstructure, Properties and Residual Stress Distribution -- Ajit Achuthan, Associate Professor, Mechanical & Aeronautical Engineering, Clarkson University

10:10 - 10:35 AM Break

10:35 - 11:00 AM Use of Broad Spectrum Photonic Curing of Fluoroplastics and its Application in Marking Systems -- Yu Qi, Project Manager, New Materials Design and Development, Xerox Corporation

11:00 - 11:25 AM EWI and Buffalo Manufacturing Works Overview -- Alber Sadek, EWI – Materials Engineering Group

11:25 - 11:50 AM Investigation of the Impact of Filtration Medium Composition on CMP Slurry Characteristics and Performance -- Patrick Connor, Principal Scientist, Pall Corporation

11:50 - 12:15 PM Magnetron Sputtering Targets -- Igor Sevonkaev, Engineer Specialist, Praxair Surface Technologies

12:15 - 12:35 Roll-to-Roll Manufacturing of Electronics – From Silicon Wafer to Flexible Plastic – Mark Poliks Director, CAMM, & Professor Materials Science & Engineering Program, Binghamton University

12:35 - 2:00 PM Lunch - Tent

2:00 - 3:00 PM CAMP Board Meeting – Ontario Room

2:00 - 5:00 PM Poster Session - Susan B. Anthony Room 5:45 - 6:45 PM Reception - Tent

6:45 - 7:40 PM Dinner – Tent

7:40 - 8:00 PM Poster Award Winners Presentation

8:00 PM Introduction: Chuck Thorpe, Senior Vice President & Provost, Clarkson University

8:05 PM Keynote address: Innovation Trends in Marking Systems -- Abu Islam, Manager, Advanced Technology Group, GDC, Xerox Corporation

Friday, May 22

HONORING PROFESSOR RICHARD PARTCH, 50 YEARS OF SERVICE

7:00 - 7:55 AM Breakfast - The Inn on the Lake’s Restaurant

7:55 - 8:00 AM Introduction by S.V. Babu, Director, CAMP & Distinguished University Professor, Clarkson University – Grand Ballroom

8:00 - 8:25 AM Polymeric Hollow Microspheres as Opacifiers in Direct Thermal Printing Applications -- Brian Gilmartin, IIMAK

8:25 - 8:50 AM Ultrafast Laser Modification of Ceramics -- S.K. Sundaram, Inamori Professor of Materials Science & Eng. Kazuo Inamori School of Engineering, Alfred University

8:50 - 9:15 AM New Challenges in BEOL Slurry Design for Advanced Technical Nodes -- Hongyu Wang, Senior Scientist, Dow Chemical

9:15 - 9:40 AM 3D Printing & Additive Manufacturing - Changing the Way We Innovate & Manufacture Products -- Maura Sweeney, Stratasys

9:40 - 10:05 AM Improving our Regional Economy: Linking Clarkson to the North Country -- Bill Murray, Executive Director, St Lawrence City CITEC

10:05 - 10:30 AM Break

10:30 - 10:55 AM The Importance of Science and Technology in Small Business -- James Brooker, VP of Engineering, R&D, OTIS Technology

10:55 - 11:20 AM Materials Interactions with Functional Surfaces in Novel Marking Systems -- Chu-heng Liu, Principal Scientist, Xerox Corp.

11:20 - 11:45 AM Bioactive Materials for Bone Restorations -- Joe Bringley, Founder & President, Transparent Materials, LLC

11:45 - 12:10 PM Colloidal Science Innovations at the Alcoa Technical Center -- Justen Schaefer, Senior Colloidal Scientist, Alcoa Inc.

12:10 - 12:15 PM Concluding Remarks -- S.V. Babu, Director, CAMP & Distinguished University Professor , Clarkson University

12:15 PM Buffet Lunch - Tent

CAMP’s Annual Technical Meeting

Canandaigua Inn on the Lake
Canandaigua, New York
May 20-22, 2015